A Comprehensive Guide to Functional Analysis Procedures in ABA

A functional analysis is the gold standard for finding out why a problem behavior happens. Instead of guessing from interviews or observation, a behavior analyst systematically tests the variables that might be maintaining the behavior, and lets the data show which one actually is. This guide covers the standard functional analysis conditions, how to run and read an FA, the most common variations, safety safeguards, and how FA questions appear on the BCBA exam.

Key takeaways

  • Purpose: identify the function of problem behavior by testing variables experimentally.
  • Standard conditions: attention, escape (demand), alone, and play (control), with tangible often added.
  • Each test condition sets up a motivating operation and delivers one specific consequence for problem behavior.
  • Read the graph by comparing each test condition with the play condition.
  • Variations such as brief, trial-based, latency-based, precursor, and IISCA formats adapt the FA to time, setting, and safety needs.

What is a functional analysis?

A functional analysis (FA) is an assessment in which antecedents and consequences are systematically manipulated to see which ones affect a problem behavior. Each test condition arranges a likely reason for the behavior: for example, a condition where problem behavior produces attention, and another where it produces a break from work. If behavior occurs reliably more often in one condition than in the control condition, that points to the function.

The standard approach was described by Iwata and colleagues in 1982 and remains the foundation of function-based treatment. On the BCBA exam, functional analysis falls under Domain F, Behavior Assessment (23 scored questions), task F.6.

Functional analysis vs. other functional assessments

MethodHow it worksWhat it shows
Indirect assessmentInterviews, rating scales, and questionnaires with caregivers or staffHypotheses about function; quick but often unreliable on their own
Descriptive assessmentDirect observation in the natural environment, such as ABC data or scatterplotsCorrelations between behavior and environmental events
Functional analysisExperimental manipulation of antecedents and consequencesA functional relation between variables and behavior
All three are part of a functional behavior assessment (FBA). Only a functional analysis can demonstrate causation.

The standard functional analysis conditions

ConditionAntecedent (motivating operation)Consequence for problem behaviorTests for
AttentionThe therapist diverts attention, for example by reading a magazineBrief attention, such as a statement of concern or a reprimandSocial positive reinforcement (attention)
Escape (demand)The therapist presents difficult tasks with promptsA brief break: tasks are removedSocial negative reinforcement (escape)
TangibleA preferred item is removed after brief accessThe item is returned for a short timeSocial positive reinforcement (access to items)
Alone / no interactionThe learner is alone, or the therapist provides no interaction or materialsNo social consequencesAutomatic reinforcement
Play (control)Free access to preferred items and attention; no demandsNo programmed consequencesComparison condition: motivating operations for social functions are minimized
Conditions are usually short (often 5 to 15 minutes) and repeated several times in a multielement design.

How to run a functional analysis

  1. Gather information first. Use indirect and descriptive assessments to form hypotheses and choose which conditions to include.
  2. Operationally define the target behavior and choose a measure, such as rate or latency.
  3. Get informed consent and plan safety procedures, including criteria for ending a session.
  4. Design each condition with a distinct antecedent, a consequence that follows only the target behavior, and distinctive cues (such as different therapists, rooms, or colored shirts) to help discrimination.
  5. Alternate conditions, usually in a multielement design, and repeat each several times.
  6. Collect interobserver agreement and procedural integrity data.
  7. Graph the results after every session, and continue until a clear pattern emerges.

How to interpret functional analysis results

Functional analysis results in a multielement designA multielement graph of aggression per minute across 35 sessions with five alternating conditions. Aggression is consistently high in the escape (demand) condition and low in the attention, tangible, alone, and play conditions, suggesting aggression is maintained by escape from demands.0123415101520253035Escape (demand)AttentionTangibleAlonePlay (control)Aggression per minuteSessions
A functional analysis in a multielement design. Aggression is consistently highest in the escape (demand) condition, suggesting it is maintained by negative reinforcement in the form of escape from demands. (Illustrative data.)
Pattern on the graphLikely interpretation
High in attention, low in playMaintained by attention
High in escape (demand), low in playMaintained by escape from demands
High in tangible, low in playMaintained by access to items or activities
High in alone (and often in all conditions)Maintained by automatic reinforcement
High in two or more test conditionsMultiple control (more than one function)
Low and similar in all conditionsBehavior did not occur; consider a longer FA or different conditions
High and similar in all conditionsUndifferentiated; consider automatic reinforcement or redesigning conditions

Always compare each test condition with the play condition. For a refresher on reading graphs, see Visualizing Behavior Change: Graphs in ABA.

Common functional analysis variations

VariationHow it differsBest for
Brief FAA few short sessions of each condition, sometimes followed by a quick reversalOutpatient clinics and limited time
Trial-based FAShort trials embedded in natural routines, such as a classroomSchools and natural settings
Latency-based FAEach session ends after the first instance of the behavior; latency is the measureDangerous behavior, since fewer responses occur
Precursor FATargets a reliable earlier behavior (a precursor) instead of the dangerous oneSevere problem behavior with a predictable sequence
Interview-informed synthesized contingency analysis (IISCA)Uses an open-ended interview to design one test condition that combines several reinforcers, compared with a matched controlPractical settings; quickly identifying a combination of reinforcers
Pairwise or reversal formatsCompares one test condition at a time with a control, rather than alternating all conditionsClarifying undifferentiated results

Safety and ethical considerations

  • Informed consent from the client or guardian, with a clear explanation of the procedures and risks.
  • Medical consultation when behavior could cause injury, or when a medical cause is possible.
  • Session termination criteria defined in advance, such as stopping after a set number of responses or any sign of injury.
  • Protective equipment and trained staff as needed.
  • Least risky format: consider latency-based, precursor, or trial-based FAs when behavior is dangerous.
  • Competence: conduct FAs only within your training and scope of competence, with supervision when needed.

From function to treatment

An FA is only useful if it leads to function-based treatment. Once you know the function, you can teach a replacement behavior that produces the same reinforcer (such as functional communication training), place problem behavior on extinction, and adjust antecedents to reduce the motivating operation. See Understanding Differential Reinforcement for related procedures.

Practice question

During a functional analysis, a learner’s hand mouthing occurs at high, similar rates in the attention, escape, tangible, alone, and play conditions. What is the most likely function, and what is a reasonable next step?

  1. Attention; begin functional communication training
  2. Escape; reduce task difficulty
  3. Automatic reinforcement; conduct a series of alone sessions to confirm
  4. No function; discontinue assessment
Show the answer

C. Automatic reinforcement; conduct a series of alone sessions to confirm. When behavior is high across all conditions, including alone and play, it is likely not maintained by social consequences. Running extended alone or no-interaction sessions can confirm that the behavior persists without social reinforcement. The undifferentiated pattern does not support attention or escape, and the behavior clearly does serve a function.

Master Domain F, one task at a time

Behavior Assessment gained 5 questions in the 6th edition. The free BCBA Study Checklist lists all 8 Domain F tasks so you can track exactly what you have mastered.

Functional analysis FAQ

What is a functional analysis in ABA?

A functional analysis (FA) is an assessment in which a behavior analyst systematically manipulates antecedents and consequences to test which variables maintain a problem behavior. It is the only functional behavior assessment method that can demonstrate a functional relation, rather than a correlation.

What are the conditions of a standard functional analysis?

The standard conditions are attention, escape (demand), alone (or no interaction), and play (the control condition). A tangible condition is often added to test whether behavior is maintained by access to preferred items.

What is the difference between a functional analysis and a functional behavior assessment?

Functional behavior assessment (FBA) is the overall process of identifying the function of behavior. It can include indirect assessments (interviews, rating scales), descriptive assessments (direct observation such as ABC data), and functional analysis. A functional analysis is the experimental part of an FBA.

Why is the play condition used as a control?

In the play condition, preferred items and attention are freely available and no demands are placed, so the motivating operations for socially maintained problem behavior are minimized. Low responding in play, compared with higher responding in a test condition, helps show that the test condition’s variables are responsible.

What does it mean if problem behavior is high in every condition?

If problem behavior is high and similar across all conditions, including alone, the results may suggest automatic reinforcement. Analysts often follow up with a series of alone or no-interaction sessions to see whether the behavior persists without social consequences.

Is functional analysis safe?

When properly planned, functional analyses have been conducted safely in many studies and clinical settings. Safeguards include informed consent, medical consultation, session termination criteria, protective equipment, trained staff, and procedures such as precursor or latency-based FAs that reduce how much problem behavior occurs.

Related reading: A Comprehensive Guide to Preference Assessments · Understanding Reversal Designs · 20 Free BCBA Practice Questions

About the author

Dr. Jaime Flowers, Ph.D., BCBA, is a Board Certified Behavior Analyst and the creator of ABA Study Guide, which helps BCBA candidates study one checklist item at a time. Read more about Jaime.

Last reviewed: November 20, 2026.

References

  • Behavior Analyst Certification Board. (2022). BCBA test content outline (6th ed.).
  • Bloom, S. E., Iwata, B. A., Fritz, J. N., Roscoe, E. M., & Carreau, A. B. (2011). Classroom application of a trial-based functional analysis. Journal of Applied Behavior Analysis, 44(1), 19–31.
  • Cooper, J. O., Heron, T. E., & Heward, W. L. (2020). Applied behavior analysis (3rd ed.), Chapter 27: Functional behavior assessment. Pearson.
  • Hanley, G. P., Jin, C. S., Vanselow, N. R., & Hanratty, L. A. (2014). Producing meaningful improvements in problem behavior of children with autism via synthesized analyses and treatments. Journal of Applied Behavior Analysis, 47(1), 16–36.
  • Iwata, B. A., Dorsey, M. F., Slifer, K. J., Bauman, K. E., & Richman, G. S. (1994). Toward a functional analysis of self-injury. Journal of Applied Behavior Analysis, 27(2), 197–209. (Reprinted from Analysis and Intervention in Developmental Disabilities, 2, 3–20, 1982.)
  • Northup, J., Wacker, D., Sasso, G., Steege, M., Cigrand, K., Cook, J., & DeRaad, A. (1991). A brief functional analysis of aggressive and alternative behavior in an outclinic setting. Journal of Applied Behavior Analysis, 24(3), 509–522.
  • Thomason-Sassi, J. L., Iwata, B. A., Neidert, P. L., & Roscoe, E. M. (2011). Response latency as an index of response strength during functional analyses of problem behavior. Journal of Applied Behavior Analysis, 44(1), 51–67.

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top